EMC E20-805 certification exam is very important for every IT person. With this certification you will not be eliminated, and you will be a raise. Some people say that to pass the EMC E20-805 exam certification is tantamount to success. Yes, this is true. You get what you want is one of the manifestations of success. DumpLeader of EMC E20-805 exam materials is the source of your success. With this training materials, you will speed up the pace of success, and you will be more confident.
The appropriate selection of training is a guarantee of success. However, the choice is very important, DumpLeader popularity is well known, there is no reason not to choose it. Of course, Give you the the perfect training materials, if you do not fit this information that is still not effective. So before using DumpLeader training materials, you can download some free questions and answers as a trial, so that you can do the most authentic exam preparation. This is why thousands of candidates depends DumpLeader one of the important reason. We provide the best and most affordable, most complete exam training materials to help them pass the exam.
You can free download part of DumpLeader's exercises and answers about EMC certification E20-805 exam as a try, then you will be more confident to choose our DumpLeader's products to prepare your EMC certification E20-805 exam. Please add DumpLeader's products in you cart quickly.
Exam Code: E20-805
Exam Name: EMC (EMC Storage and Information Infrastructure Expert Exam for Techno)
One year free update, No help, Full refund!
Total Q&A: 125 Questions and Answers
Last Update: 2014-01-27
To effectively getting ready for EMC E20-805 test, do you know what tools are worth using? Let me tell you. DumpLeader EMC E20-805 pdf dumps are the most credible. The exam dumps is rare certification training materials which are researched by IT elite. DumpLeader E20-805 braindump has a high hit rate. 100% sail through your exam. This is because IT experts can master the question point well, so that all questions the candidates may come across in the actual test are included in DumpLeader exam dumps. Is it amazing? But it is true. After you use our dumps, you will believe what I am saying.
In order to allow you to safely choose DumpLeader, part of the best EMC certification E20-805 exam materials provided online, you can try to free download to determine our reliability. We can not only help you pass the exam once for all, but also can help you save a lot of valuable time and effort. DumpLeader can provide you with the real EMC certification E20-805 exam practice questions and answers to ensure you 100% pass the exam. When having passed EMC certification E20-805 exam your status in the IT area will be greatly improved and your prospect will be good.
In recent years, many people are interested in EMC certification exam. So, EMC E20-805 test also gets more and more important. As the top-rated exam in IT industry, E20-805 certification is one of the most important exams. With E20-805 certificate, you can get more benefits. If you want to attend the exam, DumpLeader EMC E20-805 questions and answers can offer you convenience. The dumps are indispensable and the best.
E20-805 Free Demo Download: http://www.dumpleader.com/E20-805_exam.html
NO.1 Performance is a major factor in the deployment for the customer. The customer also mentions the
need for a backup solution that minimizes the impact to production. Furthermore, the customer wants
frequent datastore checks to validate integrity.
Which solution supports the customer's goals?
A. Use Replication Manager VSS integration and a VNX clone to create a copy of the production
LUN.
Perform regular database checks against the copy.
B. Use Replication Manager and VNX Snap to create a space-efficient copy.
Perform regular database checks using eseutil.
C. Use NetWorker PowerSnap to create a VNX clone.
Perform regular database checks with eseutil.
D. Use NetWorker PowerSnap to create a space-efficient copy with VNX Snap.
Perform regular database checks with eseutil.
Answer: A
EMC E20-805 exam E20-805 test questions E20-805 exam dumps
NO.2 The Security Operations team would like a way to quickly mitigate security vulnerabilities that are
reported by networking equipment vendors.
Which solution should be used to identify hospital equipment that is affected by these vulnerabilities?
A. EMC Ionix Network Configuration Manager Network Advisor
B. EMC Ionix Network Configuration Manager Report Advisor
C. RSA enVision
D. Application Discovery Manager
Answer: A
EMC E20-805 dumps E20-805 E20-805
NO.3 Which utility should you recommend to the customer to assist in migrating to the proposed
infrastructure?
A. VMware vCenter Converter
B. VMware Storage vMotion
C. SAN Copy
D. VMware vMotion
Answer: A
EMC certification training E20-805 E20-805
NO.4 A new VMware customer would like to understand RecoverPoint s additional DR protection levels for
their virtual machines.
What design alterations should you propose?
A. Set up the ESX servers by using a CLR protection method and VMware s SRM functionality for
automated DR response.
B. Implement VMware SRM with the existing CDP configuration to provide automated local recovery.
C. Implement RecoverPoint CDP protection and augment the CDP copy with CLARiiON SnapView
technology.
D. Implement VMware fault tolerance on each VM between the two sites.
Answer: A
EMC E20-805 E20-805 E20-805 pdf E20-805 E20-805 pdf
Topic 2, Scenario 21
Refer to the Exhibit.
A customer is migrating from their present DAS solution to a new VNX array. As part of the migration, you
have been tasked with sizing the Microsoft Exchange 2010 environment, specifically sizing the
appropriate IOPS profile for the Exchange mailbox servers.
The customer has profiled the environment and provided you with the data in the exhibit. Each mailbox
store contains 100-120 heavy profile users, and each server has 10-12 mailbox stores. Mailbox limits
have been put in place at 500 MB per mailbox. Deleted item retention has been left at default values.
NO.5 Your customer has an RPO of five hours for accounts receivables during the business hours of 8 a.m.
to 6 p.m. The customer's requirement is that a tape copy of a SQL level backup be made to match each
five-hour RPO mark. The creation of the SQL level tape copy must not compromise production server
performance.
To achieve these goals, Step 1 is to use Replication Manager (RM) to create a snapshot at noon and at 5
p.m.
What other steps are required?
A. Step 2 - Mount the snap to the mount server Step 3 - Activate the database Step 4 - Perform a
SQL-level backup
B. Step 2 - Mount the snap to the same server Step 3 - Activate the database Step 4 - Perform a
SQL-level backup
C. Step 2 - Mount the snap to the mount server Step 3 - Perform backup of the SQL directories
D. Step 2 - Mount the snap to the same server Step 3 - Perform backup of the SQL directories
Answer: A
EMC E20-805 E20-805 E20-805 E20-805
Topic 4, Scenario 15
A midsized company wants to implement a highly integrated IT infrastructure including storage, network,
compute, and management software resources.
The IT executives think they spend too much time and effort today building, testing, and optimizing
individual components in their infrastructure. They hope to consolidate their existing server-based VDI
environment with 950 desktops, 1000 Microsoft Exchange mailboxes, and homegrown Linuxbased
applications onto a virtualized infrastructure. The goal is to reduce the current costs of their aging best of
breed
HP, Juniper, Brocade, NetApp, and CLARiiON infrastructure.
The company wants the solution to have the following capabilities:
-Built-in high availability and redundancy
-Offsite disaster recovery with automated failover
-Architectural predictability
-Optimized storage, compute, and network
-Predictable and efficient power and cooling usage
-Calculable VM scaling
-Ease of deployment and use
-Rapid provisioning capabilities
-Simplified management
You have recommended implementing cloud services using Vblock architecture.
NO.6 Topic 1, Scenario 27
Refer to the Exhibit.
A financial institution is implementing a disaster recovery (DR) solution for their key Oracle databases and
other critical data. RecoverPoint has been chosen as the replication technology to use for the DR solution.
For maximum protection, the replication uses CLR for all Oracle systems; CRR is used for all other data.
The production site uses Sun servers for the Oracle servers and Microsoft Windows Server 2008 hosts for
all other data repositories. Storage arrays for the Oracle servers are Symmetrix arrays. All other data and
business departments store their data on CLARiiON CX4 arrays.
Recently, the human resources and finance departments were migrated to the DMX to enhance security
and performance requirements.
This company also plans to bring in a new acquisition with AIX and VMware servers in the next six months.
The AIX servers will be placed on DMX storage and the VMware servers will be placed on CLARiiON
storage. Both are slated for CDP protection.
The DR site is located 2,500 km away from the production site. A dedicated T3 WAN link runs at 44 Mb/s.
Management and replication traffic will use separate VLANs. Each site contains eight RecoverPoint
appliances (RPAs) to maximize the performance and fault-tolerance business requirements. SANTap is
used for all Oracle splitting, and CX splitters are used for all other data.
To support the actual replication needs, 12 group sets were created to support the consistency within the
Oracle consistency groups. The policies on these sets include an RPO of 15 minutes.
The remainder of the data uses 54 consistency groups with an RPO of two hours.
1.What should be done to improve the performance of the WAN link for replication?
A. Enable QoS for the VLAN with RecoverPoint traffic
B. Set the link speed on the RPA to "max throughput"
C. Enable QoS on the Oracle consistency groups
D. Configure EtherChannel Link Aggregation for use with the WAN link
Answer: A
EMC E20-805 E20-805
NO.7 How would you justify the use of CLARiiON splitters in your design.?
A. To avoid an excessive number of ITLs created on the SANTap splitter
B. To take advantage of the VMware vCenter integration for protected virtual machines
C. To minimize the required hardware purchases if SANTap was used for all splitting
D. To separate the splitter load to reduce the expected high load on the WAN link
Answer: A
EMC E20-805 E20-805 E20-805 pdf E20-805 study guide
NO.8 Which disaster recovery solution would best fit the customer s needs for the VMFS datastores?
A. RecoverPoint/SE and VMware Site Recovery Manager
B. Replicator with VMware Site Recovery Manager
C. SRDF with VMware Site Recovery Manager
D. MirrorView/A with VMware Site Recovery Manager
Answer: A
EMC E20-805 exam E20-805 E20-805 E20-805 answers real questions
NO.9 Which tool helps in analyzing the Exchange environment and provides reports on how the environment
compares with current best practices in deploying the Exchange environment?
A. ExBPA
B. Microsoft Windows Performance Monitor
C. loadsim
D. System Attendant
Answer: A
EMC E20-805 E20-805 E20-805 study guide
NO.10 You have planned to implement Replication Manager in this environment to manage the backup
requirements.
According to EMC best practices, what prerequisite should you consider?
A. Circular logging must be disabled.
B. Circular logging must be enabled.
C. Transaction logs and database files must be located on the same volume.
D. "Transaction Log location:" and System path location:" for each storage group must be different
Answer: A
EMC E20-805 exam prep E20-805 pdf E20-805
Topic 3, Scenario 13
Refer to the Exhibit.
Your customer s SQL Server environment uses native SQL backup including more granular backups such
as differential backup, as well as transaction logs, to enhance the recovery solution built into the SQL
Server.
This customer also has a software development team that currently updates the development SQL
databases from the nightly production backups. All SQL environments are hosted on VNX iSCSI LUNs.
You propose creating replicas using VNX snaps, as shown in the exhibit. Your proposal includes the
implementation of Replication Manager in this environment.
NO.11 Click the calculator icon in the upper left corner of the screen.
According to EMC best practices, what is the minimum number of RAID 1 protected 15,000 rpm spindles
needed (155 IOPS) to support the performance profile of the Microsoft Exchange database volumes?
A. 8
B. 12
C. 14
D. 18
Answer: D
EMC E20-805 E20-805 answers real questions
NO.12 Which Vblock offering is most appropriate in this scenario?
A. Vblock 0
B. Vblock 1
C. Vblock 1U
D. Vblock 2
Answer: C
EMC braindump E20-805 E20-805 E20-805 E20-805
NO.13 How can you leverage the Replication Manager (RM) infrastructure to securely provide copies of
production SQL data to the software development team?
A. Add members from the development team to the RM user list. Through RM, provide these users with
access only to specific SQL LUNs. Allow them to schedule their own replications.
B. Add members from the development team to the RM user list. Allow them to schedule their own
replications.
C. Add members from the development team to the RM user list. Through RM, provide these users with
access only to specific SQL LUNs. Allow them to create their own replication jobs.
D. Add members from the development team to the RM user list. Allow them to create their own
replication jobs.
Answer: A
EMC E20-805 E20-805 E20-805 exam dumps
NO.14 You have been asked to design a long-distance replication solution with MirrorView/S. You want to
simulate this Exchange environment and gather the baseline 200 km performance data and additional
simul-ations to perform failover testing.
Which tool should you use?
A. loadgen
B. loadsim
C. EPA
D. JetStress
Answer: A
EMC E20-805 demo E20-805 E20-805 demo
NO.15 What would you recommend to help ease the workload on the customer s support staff?
A. Provide Remote Operations Services
B. Upgrade the Advanced Management Pod (AMP) to an HA AMP
C. Implement an IP aggregation solution
D. Implement Vblock Traffic Planes
Answer: A
EMC certification training E20-805 test answers E20-805 test answers E20-805 Bootcamp
Topic 5, Scenario 17
Refer to the Exhibit.
A small hospital has a three-tier web application that manages the disbursement of medicine to patients.
Key steps in the process include:
-A doctor at the hospital prescribes medicines to a patient using a handheld device.
-The handheld device connects to the prescription application server through a secure connection
-The application authenticates the doctor's credentials.
-A database records the patient number, doctor's name, and prescribed medicine and dose.
-The prescription order is crosschecked with the patient s history. (That history is entered into a separate
application and database when the patient is admitted to the hospital.)
-If no problems are detected, the order is sent as an email to the hospital pharmacy.
-The pharmacy dispenses the medicine, and prints a label that is crosschecked by the nurse before the
medicine is administered to the patient.
This application, and all applications with which it communicates, must always be available so that
medicine can be given to patients. This means that any problems with the hospital network, application
servers, database servers, or storage arrays must be identified and resolved immediately.
NO.16 The customer wants to create application-consistent copies of Exchange 2010 and SharePoint 2007
data in a CLR configuration.
What RecoverPoint features would help the customer meet this requirement?
A. KVSS and VDI integration utilities
B. KVSS and Oracle integration utilities
C. SQLSNAP and VDI integration utilities
D. SQLSNAP and TimeFinder integration utilities
Answer: A
EMC answers real questions E20-805 E20-805 test E20-805
NO.17 How will this solution enable the customer to meet their cost savings objectives?
A. The new infrastructure will dramatically reduce implementation, testing and management efforts.
B. The new infrastructure will provide a centralized, multitenant logical architecture.
C. vStorage APIs will offload work from the hosts, allowing the hosts to scale more efficiently.
D. The highly available architecture with automated remote replication will reduce the frequency and cost
of downtime.
Answer: A
EMC exam prep E20-805 Bootcamp E20-805
NO.18 After three months of operations, the Monday SQL full backup is consistently running longer than the
defined backup window. For compliance purposes a tape backup must be created every Monday.
What would be the most secure way to meet the backup window with the least impact to existing
processes?
A. Change the schedule of the baseline snapshot to run before the Monday SQL full backup. Create the
tape copy from the baseline snapshot.
B. Change the Monday SQL full backup to a differential backup. Copy the differential backup to tape. Run
a SQL full backup only once a month.
C. Change the Monday SQL full backup to back up to a new CIFS share in the VNX. Use NDMP to create
a tape copy from the CIFS share.
D. Change the drive count to increase the aggregate performance of the database so that the Monday
SQL full backup runs faster.
Answer: A
EMC E20-805 pdf E20-805 exam simulations E20-805 exam simulations
NO.19 What should be done to throttle the amount of data being sent over the T3 line when new servers are
brought under RecoverPoint control?
A. Use the compression slider settings for best compression within the cluster
B. Use the balance_load CLI commands to distribute the CGs across the RPAs in the cluster evenly
C. Use the compression slider settings for best performance within the cluster
D. Use a combination of Distributed Consistency Group and bandwidth limits on the Oracle CGs in the
cluster
Answer: A
EMC exam E20-805 E20-805
NO.20 As part of a legal discovery request, the customer must make available a functioning copy of the SQL
environment as it existed at the time of the TLog3 backups. What would be the most efficient way to
restore the SQL server to that point to make the data available?
A. 1 - Use RM to restore the data to the replica created just before TLog3 backups were completed 2 -
Roll SQL forward by applying TLog3 backups
B. 1 - Restore the Monday SQL Server backup 2 - Apply the Tuesday SQL differential backup 3 - Roll SQL
forward by applying TLog3 backups
C. 1 - Use RM to restore the data to the replica created just after TLog3 backups were completed 2 - Roll
SQL backward by subtracting TLog4 backups
D. 1 - Use RM to restore the data to the replica created just after TLog2 backups were completed 2 - Roll
SQL forward by applying TLog3 backups
Answer: A
EMC questions E20-805 exam E20-805 E20-805 E20-805
DumpLeader offer the latest LOT-404 exam material and high-quality 70-332 pdf questions & answers. Our MB6-870 VCE testing engine and HP0-J64 study guide can help you pass the real exam. High-quality 70-342 dumps training materials can 100% guarantee you pass the exam faster and easier. Pass the exam to obtain certification is so simple.
Article Link: http://www.dumpleader.com/E20-805_exam.html
没有评论:
发表评论