You can free download part of DumpLeader's exercises and answers about Lpi certification 117-303 exam as a try, then you will be more confident to choose our DumpLeader's products to prepare your Lpi certification 117-303 exam. Please add DumpLeader's products in you cart quickly.
IT industry is growing very rapidly in the past few years, so a lot of people start to learn IT knowledge, so that keep them for future success efforts. Lpi 117-303 certification exam is essential certification of the IT industry, many people frustrated by this certification. Today, I will tell you a good way to pass the exam which is to choose DumpLeader Lpi 117-303 exam training materials. It can help you to pass the exam, and we can guarantee 100% pass rate. If you do not pass, we will guarantee to refund the full purchase cost. So you will have no losses.
In such society where all people take the time so precious, choosing DumpLeader to help you pass the Lpi certification 117-303 exam is cost-effective. If you choose DumpLeader, we promise that we will try our best to help you pass the exam and also provide you with one year free update service. If you fail the exam, we will give you a full refund.
Now in this time so precious society, I suggest you to choose DumpLeader which will provide you with a short-term effective training, and then you can spend a small amount of time and money to pass your first time attend Lpi certification 117-303 exam.
Exam Code: 117-303
Exam Name: Lpi (LPI Level 3 Exam 303)
One year free update, No help, Full refund!
Total Q&A: 101 Questions and Answers
Last Update: 2013-11-08
DumpLeader's providing training material is very close to the content of the formal examination. Through our short-term special training You can quickly grasp IT professional knowledge, and then have a good preparation for your exam. We promise that we will do our best to help you pass the Lpi certification 117-303 exam.
117-303 Free Demo Download: http://www.dumpleader.com/117-303_exam.html
NO.1 Which of the following are valid OpenVPN authentication modes? (Choose TWO correct answers)
A. S/Key
B. Kerberos
C. Static Key
D. Password
E. TLS
Answer: CE
Lpi 117-303 117-303 certification 117-303 117-303 exam simulations
NO.2 Which LUKS action, when supplied to the cryptsetup command, will initialize a LUKS partition and set
the initial key? (Provide only the action name)
Answer: luksFormat
Lpi 117-303 117-303 exam dumps
NO.3 Which directive in the OpenVPN client.conf specifies the remote server and port that the client should
connect to? (Provide only the directive, without any options or parameters)
Answer: remote
Lpi 117-303 Bootcamp 117-303 117-303 answers real questions
NO.4 Linux Extended Attributes include attribute classes. Which of the following are included in the
defined attribute classes? (Select THREE correct answers)
A. default
B. system
C. owner
D. trusted
E. user
Answer: BDE
Lpi exam 117-303 117-303 practice test
NO.5 What is true about the permissions for the file afile given the following output from getfacl? (Select
TWO correct answers)
% getfacl afile
# file: afile
# owner: matt
# group: support
user::rwx
user:hugh:rw
group::r
group:staff:rx
mask::rwx
other::r
A. Anyone in the support group will be able to read and execute the file.
B. The user hugh will be able to read the contents of the file.
C. Anyone in the users group will be able to read the file.
D. The user matt will not be able to edit this file.
E. Anyone in the staff group will be able to read and execute the file.
Answer: BE
Lpi 117-303 117-303 117-303 dumps
NO.6 An administrator has successfully configured a cryptographic volume for dmcrypt, and has added the
following line to /etc/fstab:
/dev/mapper/cryptvol /media/crypt auto defaults 0 0
Upon booting the system, the error message "mount: special device /dev/mapper/cryptvol does not exist"
is displayed. What configuration file has the administrator forgotten to edit? (Provide the full path and
filename)
Answer: /etc/crypttab
NO.7 SELinux has just been installed on a Linux system and the administrator wants to use SELinux in
permissive mode in order to audit the various services on the system. What command will switch
SELinux into permissive mode?
A. setenforce 0
B. /etc/init.d/selinux stop
C. selinux passive
D. /etc/init.d/selinux startpassive
Answer: A
Lpi demo 117-303 117-303 117-303 demo 117-303 demo
NO.8 An administrator has just configured an OpenVPN client. Upon starting the service, the following
message is displayed:
TLS Error: TLS key negotiation failed to occur within 60 seconds
Which of the following statements is true?
A. The client was unable to establish a network connection with the server.
B. The client was able to establish a network connection with the server, however TLS key negotiation
failed, resulting in a fallback to SSL.
C. The client was able to establish a network connection with the server, however TLS and SSL security
are not enabled.
D. The client was able to establish a network connection with the server, however TLS key negotiation
took longer than 60 seconds, indicating that there may be a problem with network performance.
Answer: A
Lpi braindump 117-303 practice questions 117-303 study guide 117-303 117-303
NO.9 Which of the following export options, when specified in /etc/exports, will tell the server to use the
NFSv4 Pseudofilesystem?
A. fsid=2
B. fsid=0
C. fsid=3
D. fsid=1
Answer: B
Lpi exam 117-303 117-303 117-303
NO.10 What command will remove the dmcrypt mapping named cryptvol? (Provide the command with any
options and parameters)
Answer: /sbin/cryptsetup remove crypt-vol cryptsetup remove crypt-vol
NO.11 In which of the following scenarios MUST an administrator use ethernet bridging instead of routing
when configuring an OpenVPN site? (Select TWO correct answers)
A. Some OpenVPN clients will be installed on laptops and must be able to connect from different
locations.
B. NetBIOS traffic must be able to traverse the VPN without implementing a WINS server.
C. The IPv4 protocol is required.
D. It will be necessary to use an MTU setting other than the default.
E. The IPX protocol is required.
Answer: BE
Lpi Bootcamp 117-303 questions 117-303 117-303 117-303
NO.12 When adding additional users to a file's extended ACLs, what is true about the default behaviour of
the ACL mask for the file?
A. The mask is modified to be the union of all permissions of the file owner, owning group and all named
users and groups.
B. The mask is left unchanged.
C. If required, a warning is printed indicating that the mask is too restrictive for the permissions being
granted.
D. The mask is modified to be the union of all permissions of the owning group and all named users and
groups.
Answer: D
Lpi original questions 117-303 exam simulations 117-303 117-303 exam
NO.13 What does ntop use for data collection?
A. Network packets
B. Log files
C. Frame relay
D. SNMP
Answer: A
Lpi 117-303 117-303 117-303 117-303
NO.14 You wish to revoke write access for all groups and named users on a file. Which command will make
the correct ACL changes?
A. setfacl x group:*:rx,user:*:rx afile
B. setfacl x mask::rx afile
C. setfacl m mask::rx afile
D. setfacl m group:*:rx,user:*:rx afile
Answer: C
Lpi braindump 117-303 certification training 117-303 dumps
NO.15 What is the default UDP port for OpenVPN traffic?
Answer: 1194
NO.16 Which of the following are valid dmcrypt modes? (Choose THREE correct answers)
A. XTS
B. ESSIV
C. GMR
D. KWG
E. LRW
Answer: ABE
Braindumps Lpi 117-303 practice questions 117-303 117-303 pdf
NO.17 What command will list basic information about all targets available to cryptmount? (Provide the
command with any options or parameters)
Answer: cryptmount --list /usr/bin/cryptmount -l /usr/bin/cryptmount --list cryptmount -l
NO.18 Which of the following are common techniques for securing a sendmail server? (Select THREE correct
answers)
A. Maintain user accounts in an LDAP directory.
B. Enable TLS.
C. Disable VRFY.
D. Run sendmail in a chroot'd environment.
E. Disable USRLKUP.
Answer: BCD
Lpi study guide 117-303 study guide 117-303 pdf 117-303
NO.19 You are certain that your kernel has been compiled with ACL support, however, when you try to set an
ACL on a file, you get the following output:
% setfacl m user:hugh:r afile.txt
setfacl: afile.txt: Operation not supported
What is the most likely reason for this problem?
A. There is an error in the command line parameters.
B. There is no user on the system named hugh.
C. The partition has not been mounted with the acl option.
D. The file afile.txt doesn't exist.
Answer: C
Lpi 117-303 117-303 demo 117-303 study guide 117-303
NO.20 An administrator has created a mapping with the following command:
cryptsetup luksOpen /dev/sda1 cryptvol
and has set three different keys. Which command below will delete the first key?
A. cryptsetup luksDelKey /dev/sda1 0
B. cryptsetup luksDelKey /dev/sda1 1
C. cryptsetup luksDelKey /dev/mapper/cryptvol 1
D. cryptsetup luksDelKey /dev/mapper/cryptvol 0
Answer: A
Lpi certification 117-303 exam 117-303 117-303
DumpLeader offer the latest C_TSCM62_65 exam material and high-quality 70-462 pdf questions & answers. Our NS0-504 VCE testing engine and 70-492 study guide can help you pass the real exam. High-quality JN0-360 dumps training materials can 100% guarantee you pass the exam faster and easier. Pass the exam to obtain certification is so simple.
Article Link: http://www.dumpleader.com/117-303_exam.html
没有评论:
发表评论